My tower is 60 foot, with about 8 inches at top, for climbing. Center pole at 15 foot. makes it with center extended 75 foot Welded and galvanized. Built by Morrison tower. Hinged, with base. Base is welded to old base. Can be sawed and rewelded for re installation. Comes with the following: 2 100 foot 3/8 hard line 2 Antenna Specialists dual lobe VHF antennas 1- GE ground Plane antenna 1- UHF Base antenna (Commercial but can be used for ham UHF) 1- UHF yaggie antenna * - Several RG-8 cables at 100 foot long with connectors. Also has MATV set up with three TV antennas about 1/2 up. You can take them but not necessary. On the ground is a small box for the splitters, amplifier, and power for the MATV system. (Multi Antenna Television). If your interested, Please send email and I will email you some pictures of the tower and the antennas on the tower. Make me an offer. You will need to remove. You will be responsible for the safe, and timly removal of the tower, antennas, and the RF feed cables.   If your from this area, and are looking for a set of UHF frequencies. You can have the pair that I was going to use. It's allready coordinatided. Output: 447.8250 Input: 442.8250 PL: 179.9   Area Repeater Coordination Council has allready coordinated these frequencies to me. I am making them available to anyone whom wants a set up frequencies so they can set up a repeater of their own. I can't stress hard enough to secure your tower site first!.. Don't go through the coornination before you get a tower site. I suggest you have your repeater in place before you go for the coordination.   If you would like this pair, use the email link below and let me know. List your phone number and I will call you and we can talk about the road to take at that time. They are NOT for sale, (Can't sell them anyway), but, these days finding a pair is not a easy task. Instead of this pair not in use, they are available to any qualifyed ham. Send me eMail through secure form. Opens in new window.